Factory Price Good Quality 3mm Double Side PE Coated ACP Panel ACM Sheet
Aluminum composite panel is composed of two aluminium sheets and an inner thermoplastic base core that can hold mineral charge. It is specially designed for new construction ventilated facades as well as for renovation or rehabilitation.
Solid color aluminum composite panel is produced by a continuous lamination process, in which a sheet of the material that will make up the core is extruded and compacted between two aluminium sheets that are unwound at the same time. Finally, the flatness of the material is compacted and perfected and a protective film is applied.
Advantages
1. The aluminium composite panel allows a large number of different finishes. In addition, it can be adapted to any colour from the RAL colour chart.
2. The solid finishes are homogeneous and hardly suffer the variation of their tonality with the incidence of light. They provide a sensation of solidity to the facade and are easily combined with other finishes.
3. Its use has been expanding under the cover of energy efficiency, low price and construction possibilities.
4. This type of material is specially designed for the construction of ventilated facades,their renovation or rehabilitation. It provides solutions that can be adapted to all fields of architecture.
Applications
- Construction of exterior curtain walls;
- Decorative renovation for the expansion of existing buildings;
- Interior decoration of interior walls, ceilings, bathrooms, kitchens and balconies;
- Galleries, exhibitions, lounges, stores, offices, banks, hotels, restaurants and apartments;
- Advertising boards, display platforms and signage;
- Raw materials for industrial applications;
- Materials for vehicles and vessels.
Specifications And Sizes
| Specifications and Sizes |
| Aluminum Skin Thickness: | 0.06mm-0.50mm |
| Total Panel Thickness: | 2mm-6mm |
| Width: | 1000mm, 1220mm (regular), 1250mm, 1300mm, 1500mm, 1550mm, 1575mm, (maximum) |
| Length: | Up to 5800mm |
| Standard Size: | 1220mm (width)×2440mm (length) |
| Production Capability: | 100,000sqm / month |
| Inner core | ( Normal non toxic polyethylene, one side unbroken polyethylene, two side unbroken polyethylene, virgin LDPE, ) B1 non-combustible mineral filled core,A2 non-combustible mineral filled core |
| Non-standard sizes and special colors are available depending on customers' offers |
Our Main Products
Our workshop
The factory was move in WENXIAN in 2021, mainly producing aluminum composite panel aluminum veneer and having employees more than 100 person.-Covering an area of 30 thousand square meters, with advanced production equipment that High-end instruments imported from Japan and continuously improve our technology.
Packing and Shipping:
Product Packaging:
The Marble Aluminum Composite Panels are packed in wooden crates or pallets.
Each panel is protected by a plastic film to avoid scratches and damage during transportation.
The panels are stacked and fastened with straps to make sure they remain in position during shipping.
Shipping:
The Marble Aluminum Composite Panels can be shipped via sea, air or land.
Our team will cooperate with you to decide on the best shipping method according to your location and time schedule.
We will offer you a tracking number once the product has been shipped, so that you can keep track of the delivery status.
Please check the product upon delivery and contact us right away if there are any problems.
Thank you very much for viewing this page
Sincerely look forward to our cooperation!
